#
# Copyright (c) 2007, Intel Corporation
# All rights reserved.
#
#
# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#
# ident	"@(#)ixgbe.conf	1.3	09/06/24 SMI"
#
#
# Driver.conf file for Intel 10GbE PCIE NIC Driver (ixgbe)
#
# -------------------- Jumbo Frame --------------------
# default_mtu
#	The size of the default MTU (payload without the ethernet header)
#	Allowed values:	1500 - 16366
#	Default value:	1500
#
# default_mtu		= 1500;
#
# -------------------- Flow Control --------------------
# flow_control
#	Ethernet flow control
#	Allowed values:	0 - Disable
#			1 - Receive only
#			2 - Transmit only
#			3 - Receive and transmit
#	default value:	0
#
# flow_control		= 0;
#
# -------------------- Transmit/Receive Queues --------------------
# tx/rx queue.
# tx_queue_number
#	The number of the transmit queues
#	Allowed values:	1 - 32  (for Intel 82598 10Gb Ethernet controller)
#			1 - 128 (for Intel 82599 10Gb Ethernet controller)
#	Default value:	8
#
# tx_ring_size
#	The number of the transmit descriptors per transmit queue
#	Allowed values:	64 - 4096
#	Default value:	1024
#
# rx_queue_number
#	The number of the receive queues
#	Allowed values:	1 - 64  (for Intel 82598 10Gb Ethernet controller)
#			1 - 128 (for Intel 82599 10Gb Ethernet controller)
#	Default value:	8
#
# rx_ring_size
#	The number of the receive descriptors per receive queue
#	Allowed values:	64 - 4096
#	Default value:	1024
#
# Note: The final values of tx_queue_number and rx_queue_number are decided
# by the number of interrupt vectors obtained by the driver. They could be
# less than the specified values because of limited interrupt vector number.
#
# -------- How to set parameters for a particular interface ---------
# The example below shows how to locate the device path and set a parameter
# for a particular ixgbe interface. (Using flow_control as an example)
#
# Use the following command to find out the device paths for ixgbe,
#       more /etc/path_to_inst | grep ixgbe
#
# For example, if you see,
#	"/pci@7b,0/pci10de,5d@e/pci8086,a15f@0" 0 "ixgbe"
#	"/pci@7b,0/pci10de,5d@e/pci8086,a15f@0,1" 1 "ixgbe"
#
# name = "pciex8086,10c6" parent = "/pci@0,0/pci10de,\<pci10de\>5d@e" unit-address = "0"
# flow_control = 1;
# name = "pciex8086,10c6" parent = "/pci@0,0/\<pci\>pci10de,5d@e" unit-address = "1"
# flow_control = 3;
