About this Document............................................2
What is NetBSD?................................................2
Changes Between The NetBSD 3.0.2 and 3.0.3 updates.............3
Supported devices...........................................3
Kernel......................................................3
Networking..................................................3
File system.................................................3
Security....................................................3
Miscellaneous...............................................4
alpha specific..............................................4
mac68k specific.............................................4
sparc specific..............................................4
Changes Between The NetBSD 3.0.1 and 3.0.2 updates.............4
Kernel......................................................5
Networking..................................................5
File system.................................................5
Libraries...................................................5
Security....................................................5
Miscellaneous...............................................5
amd64 specific..............................................5
sparc specific..............................................5
mac68k specific.............................................5
Changes Between The NetBSD 3.0 release and 3.0.1 update........5
Kernel......................................................6
Networking..................................................6
File system.................................................7
Libraries...................................................7
Security....................................................7
Miscellaneous...............................................7
acorn26 specific............................................8
amiga specific..............................................8
hp300 specific..............................................8
i386 specific...............................................8
m68k specific...............................................8
mips specific...............................................8
powerpc specific............................................8
sparc specific..............................................8
xen specific................................................8
The Future of NetBSD...........................................9
Sources of NetBSD..............................................9
NetBSD 3.0.3 Release Contents..................................9
NetBSD/amiga subdirectory structure........................11
Miniroot file system.......................................11
Binary distribution sets...................................11
NetBSD/amiga System Requirements and Supported Devices........13
Supported devices..........................................13
Getting the NetBSD System on to Useful Media..................15
Preparing your System for NetBSD installation.................17
Preparing your hard disk with HDToolBox....................17
Transferring the miniroot file system......................19
Installing the NetBSD System..................................19
Booting....................................................20
Once your kernel boots.....................................20
Post installation steps.......................................22
Upgrading a previously-installed NetBSD System................25
Once your kernel boots.....................................26
Compatibility Issues With Previous NetBSD Releases............27
Issues affecting an upgrade from NetBSD 2.1 and older......27
Using online NetBSD documentation.............................28
Administrivia.................................................28
Thanks go to..................................................29
We are........................................................34
Legal Mumbo-Jumbo.............................................39
The End.......................................................45
This document describes the installation procedure for
NetBSD3.0.3
on the
amiga
platform.
It is available in four different formats titled
INSTALL.ext,
where
.ext
is one of
.ps, .html, .more,
or .txt:
.ps.html.moremore(1)
and
less(1)
pager utility programs.
This is the format in which the on-line
man
pages are generally presented.
.txtYou are reading the HTML version.
The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on fifty four different system architectures (ports), featuring seventeen machine architectures across fifteen distinct CPU families, and is being ported to more. The NetBSD3.0.3 release contains complete binary releases for many different system architectures. (A few ports are not fully supported at this time and are thus not part of the binary distribution. For information on them, please see the NetBSD web site at http://www.NetBSD.org/.)
NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code.
NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist.
The NetBSD 3.0.3 update is the third security/critical update of the NetBSD 3.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons.
These fixes will also appear in future releases (NetBSD 3.2 etc), together with other less-critical fixes and feature enhancements.
Specific updates are as follows:
wd(4):
fix broken Seagate drives ST3160021A and ST3160811A.
vnd(4)
image with block size 0 to avoid a kernel panic.
dhcpd.conf(5)
to make
dhcpd(8)
use the DNS hostname as the DHCP hostname given to the client.
ipfilter(4).
dump(8)
when using -X (filesystem internal snapshots).
glob(3),
which affected
ftpd(8)
and possibly other programs (SA2006-027).
iso(4)
which could potentially lead to a local root compromise (SA2007-004).
file(1)
which could lead to an exploitable heap overflow.
racoon(8)
which could allow an attacker to disrupt a connection between IPSec peers.
veriexec(4)
flaws have been fixed: users can no longer rename a file to a veriexec
protected file or run unfingerprinted files at strict level two or above.
file(1)
has been updated to version 4.21, including and integer underflow and an
integer overflow fix (CVE-2007-1536 and CVE-2007-2799).
etcupdate(8)
for upgrading.
passwd(1):
display a message indicating who's password is being changed, to avoid
confusion after
su(1).
The NetBSD 3.0.2 update is the second security/critical update of the NetBSD 3.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons.
These fixes will also appear in future releases (NetBSD 3.1 etc), together with other less-critical fixes and feature enhancements.
Specific updates are as follows:
sshd_config(8)
to enable SSH version 2 only.
ippp(4)
and
pppoe(4)
(SA2006-019).
sendmail(8)
(SA2006-017).
openssl(1)
(SA2006-023).
openssl(1)
(SA in preparation, CVE entries: 2006-2937, 2940, 3738 and 4343).
sshd(8)
(SA in preparation, CVE entries: 2006-4924 and 5051).
named(8)
on sparc and sparc64 to avoid a crash.
The NetBSD 3.0.1 update is the first security/critical update of the NetBSD 3.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons.
These fixes will also appear in future releases (NetBSD 3.1 etc), together with other less-critical fixes and feature enhancements.
Specific updates are as follows:
wdc(4):
after a reset don't wait for drives to come ready if there are no drives (fixes
a 30s hang after resume).
wd(4)
for 1 and 2TB disks.
azalia(4)
when a connection list has invalid NIDs.
aic(4):
work around an rbus resource allocation problem so cards work again.
twe(4):
fix a memory leak in the TWEIO_GET_PARAM ioctl.
usb(4):
Allow a NULL pointer as argument to usb_get_next_event(), and don't allocate a
"struct usb_event" on stack in usb_add_event().
sysctl(2)
before passing it to
vslock(9).
This prevents a local DOS (SA2006-013).
pmatch(9)
expression which should catch all present and future seagate drives larger than
200GB for the WD_QUIRK_FORCE_LBA48 quirks.
bridge(4)
structs are initialized to 0.
bridge(4)
(SA2006-005).
sigaction(2)
to setup automatic disposal of child processes after daemonizing
rpc.statd(8).
This is more portable and avoids zombie
rpc.statd(8)
processes after an NFS client running e.g. Mac OS X shuts down.
pam_nologin(8):
use the class of the user, not then default class, when checking for nologin
and ignorelogin login.conf(5) capabilities.
pam_unix(8):
fix an uninitialized variable, and remove some unreachable code.
rnd(4)
code probing for the Intel hardware RNG to avoid false detections (SA2006-009).
mail(1)
creates record file with insecure umask (SA2006-007).
fast_ipsec(4)
stack that renders the IPSec anti-replay service ineffective under certain
circumstances (SA2006-011).
login(1),
pam_securetty(8):
don't issue a different message for root login on an insecure terminal.
ftp(1).
sh(1)
expand "$@" correctly again.
wdc(4),
especially the deferral of drive probe.
This is the tenth major release of NetBSD for the Amiga and DraCo line of computers.
The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of computer software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project.
The NetBSD Foundation will help improve the quality of NetBSD by:
We intend to begin narrowing the time delay between releases. Our ambition is to provide a full release every six to eight months.
We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD.
We intend to continue our current practice of making the NetBSD-current development source available on a daily basis.
We intend to integrate free, positive changes from whatever sources submit them, providing that they are well thought-out and increase the usability of the system.
Above all, we hope to create a stable and accessible system, and to be
responsive to the needs and desires of
NetBSD
users, because it is for
and because of them that
NetBSD
exists.
Refer to
http://www.NetBSD.org/mirrors/.
The root directory of the NetBSD3.0.3 release is organized as follows:
.../NetBSD-3.0.3/
CHANGESLAST_MINUTEMIRRORSREADME.filesTODOpatches/source/In addition to the files and directories listed above, there is one directory per architecture, for each of the architectures for which NetBSD3.0.3 has a binary distribution.
The source distribution sets can be found in subdirectories of the
source
subdirectory of the distribution tree.
They contain the complete sources to the system.
The source distribution sets are as follows:
config(8);
and
dbsym(8).
All the above source sets are located in the
source/sets
subdirectory of the distribution tree.
The source sets are distributed as compressed tar files.
Except for the
pkgsrc
set, which is traditionally unpacked into
/usr/pkgsrc,
all sets may be unpacked into
/usr/src
with the command:
#( cd / ; tar -zxpf - ) < set_name.tgz
In each of the source distribution set directories, there are files which contain the checksums of the files in the directory:
BSDSUMCKSUMMD5SYSVSUMThe MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files.
amiga
subdirectory of the distribution:
.../NetBSD-3.0.3/amiga/.
It contains the following files and directories:
INSTALL.htmlINSTALL.psINSTALL.txtINSTALL.more.more
file contains underlined text using the
more(1)
conventions for indicating italic and bold display.
binary/kernel/netbsd-GENERIC.gzsets/installation/floppy/miniroot/misc/miniroot.fs/
(root) and
/usr
partitions and getting ready to extract (and possibly first
fetching) the distribution sets.
There is enough on this file system to allow you to make a SLIP or
PPP connection, configure an Ethernet, mount an NFS file system or ftp.
You can also load distribution sets from a SCSI tape or from one of
your existing
AmigaDOS
partitions.
amiga/binary/sets
subdirectory
of the
NetBSD3.0.3
distribution tree, and are as follows:
/usr/include)
and the various system libraries (except the shared
libraries, which are included as part of the
base
set).
This set also includes the manual pages for
all of the utilities it contains, as well as the
system call and library manual pages.
/etc
and in several other places.
This set
must
be installed if you are installing the system from scratch, but should
not
be used if you are upgrading.
GENERIC
kernel, named
/netbsd.
You
must
install this distribution set.
/usr/share.
groff(1),
all related programs, and their manual pages.
NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 4.4.0. Binary sets for the X Window System are distributed with NetBSD. The sets are:
The amiga binary distribution sets are distributed as gzipped tar files
named with the extension
.tgz,
e.g.
base.tgz.
The instructions given for extracting the source sets work equally
well for the binary sets, but it is worth noting that if you use that
method, the filenames stored in the sets are relative and therefore
the files are extracted
below the current directory.
Therefore, if you want to extract the binaries into your system, i.e.
replace the system binaries with them, you have to run the
tar -xpf
command from the root directory (
/
) of your system.
This utility is used only in a Traditional method installation.
NetBSD3.0.3 runs on any Amiga that has a 68020 or better CPU with some form of MMU, and on 68060 DraCos.
NetBSD does not, and will never, run on run on A1000, A500, A600, A1200, A2000, A4000/EC030, CDTV and CD32 systems that are not enhanced by a CPU board.
For 68020 and 68030 systems, a FPU is recommended but not required for the system utilities. 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
The minimal configuration requires 6 MB of RAM (not including CHIPMEM!) and about 75 MB of disk space. To install the entire system requires much more disk space, and to run X or compile the system, more RAM is recommended. (6 MB of RAM will actually allow you to compile, however it won't be speedy. X really isn't usable on a 6 MB system.)
Here is a table of recommended HD partition sizes for a full install:
| Partition | Suggested | + X | Needed | + X |
| / (root) | 25 MB | 25 MB | 20 MB | 20 MB |
| /usr | 245 MB | 270 MB | 120 MB | 145 MB |
| /var | 20 MB | 20 MB | 5 MB | 5 MB |
| swap | 2*RAM below 32 MB, then up to you |
As you may note the recommended size of
/usr
is 125 MB greater than needed.
This is to leave room for a kernel source and compile tree as
you will probably want to compile your own kernel.
GENERIC
is large and bulky to accommodate all people.
For example, most people's machines have an FPU, so you do not need the
bulky FPU_EMULATE option.
Preconfigured or precompiled packages are installed below
/usr/pkg
by default.
You should either make
/usr
larger (if you intend to install a lot of them), make
/usr/pkg
an additional partition, use the
-p
option to
pkg_add
to install them in a different place, or link
/usr/pkg
to a different place.
If you only have less than 8 MB of fast memory, you should make your swap partition larger, as your system will be doing much more swapping. Especially: do not place it onto a old small (and normally slow) disk!
If its not on the above lists, there is no support for it in this release.
Especially (but this is an incomplete list), there are no
drivers for: Blizzard III SCSI option,
Ferret SCSI, Oktagon SCSI.
Note that if you are installing or upgrading from a writable media, the media can be write-protected if you wish. These systems mount a root image from inside the kernel, and will not need to write to the media. If you booted from a floppy, the floppy disk may be removed from the drive after the system has booted.
Installation is supported from several media types, including:
The steps necessary to prepare the distribution sets for installation depend upon which installation medium you choose. The steps for the various media are outlined below.
Note where you place the files as you will need this later.
Once you have done this, you can proceed to the next step in the installation process, preparing your hard disk.
If your SCSI CD-ROM is connected to a supported SCSI host adapter, or it is an ATAPI cd-rom connected to the A1200/A4000 internal IDE connector, simply put the CD into the drive before installation.
Find out where the distribution set files are on the CD-ROM or DVD.
Likely locations are
binary/sets
and
amiga/binary/sets.
Proceed to the instruction on installation.
split(1)
command, running e.g.
split -b 235k base.tgz base.
to split the
base.tgz
file from
amiga/binary/sets
into files named
base.aa,
base.ab,
and so on.
Repeat this for all
set_name.tgz
files, splitting them into
set_name.xx
files.
Count the number of
set_name.xx
files that make up the
distribution sets you want to install or upgrade.
You will need one sixth that number of 1.44 MB floppies.
Format all of the floppies with
MS-DOS.
Do
not
make any of them bootable
MS-DOS
floppies, i.e. don't use
format /s
to format them.
(If the floppies are bootable, then the
MS-DOS
system files that make them bootable will take up some space, and you
won't be able to fit the distribution set parts on the disks.)
If you're using floppies that are formatted for
MS-DOS
by their manufacturers, they probably aren't bootable, and you can use
them out of the box.
Place all of the
set_name.xx
files on the
MS-DOS
disks.
Once you have the files on MS-DOS disks, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading.
204.152.184.75
and the IPv6 address is
2001:4f8:4:7:2e0:81ff:fe21:6563
(as of June, 2004).
Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading.
/etc/exports
file on of the NFS server and resetting its mount daemon (mountd).
(Both of these actions will probably require superuser
privileges on the server.)
You need to know the numeric IP address of the NFS server, and, if you don't have DHCP available on your network and the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself.
Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading.
If you're making the tape on a UNIX-like system, the easiest way to do so is probably something like:
# tar -cf tape_device dist_directories
where
tape_device
is the name of the tape device that
describes the tape drive you're using; possibly
/dev/rst0,
or something similar, but it will vary from system to system.
(If you can't figure it out, ask your system administrator.)
In the above example,
dist_directories
are the
distribution sets' directories, for the distribution sets you
wish to place on the tape.
For instance, to put the
misc, base, and etc
distributions on tape (in
order to do the absolute minimum installation to a new disk),
you would do the following:
# cd .../NetBSD-3.0.3
# cd amiga/binary
# tar -cf tape_device misc etc kern
Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading.
You will need an AmigaDOS hard drive prep tool to prepare your hard drives for use with NetBSD/amiga. HDToolBox is provided with the system software and on floppy installation disks since Release 2.0 of AmigaDOS, so we will provide instructions for its use.
Note that NetBSD can't currently be installed on disks with a sector size other than 512 bytes (e.g., ``640 MB'' 90mm M-O media). You can, however, mount ADOSFS partitions on such M-O's.
A full explanation of HDToolBox can be found with your AmigaDOS manuals and is beyond the scope of this document.
The first time you partition a drive, you need to set its drive type so that you have working geometry parameters. To do this you enter the ``Change drive type'' menu, and either use ``read parameters from drive'' or set them manually.
Note you will be modifying your HD's. If you mess something up here you could lose everything on all the drives that you configure. It is therefore advised that you:
What you need to do is partition your drives; creating at least
root, swap and
/usr
partitions and possibly at least one more for
/usr/local
if you have the space.
This should be done as the HDToolBox manual describes. One thing to note is that if you are not using a Commodore controller you will need to specify the device your SCSI controller uses, e.g. if you have a Warp Engine you would:
SCSI_DEVICE_NAME=warpdrive.device
The important things you need to do above and beyond normal partitioning includes (from Partition Drive section):
/),
if you want to boot
NetBSD
directly, or the swap partition, if you want
to boot the installation miniroot directly.
To make the needed changes:
root partition : 0x4e425207 (NBR\007)
swap partition : 0x4e425301 (NBS\001)
other partitions: 0x4e425507 (NBU\007)
Here
`other'
refers to other partitions you will
format for reading and writing under
NetBSD
(e.g.
/usr)
Make sure you press
RETURN
to enter this value as some versions of HDToolBox will forget your entry
if you don't.
On the root
(/)
(and, for installation, swap) partition,
set instead this:
Mask and maxtransfer are not used with NetBSD.
Once this is done NetBSD/amiga will be able to recognize your disks and which partitions it should use.
Once the hard disk has been prepared for
NetBSD,
the miniroot file system
(miniroot.fs)
is transferred to the swap
partition configured during the hard disk prep (or the existing
swap partition in the case of an upgrade).
The xstreamtodev utility provided in the
amiga/installation/misc
directory can
be used on
AmigaDOS
to transfer the file system for either a new
installation or an upgrade.
The file system can also be transferred on an existing
NetBSD
system for an update by using dd.
This should only be done after booting
NetBSD
into single-user state.
It may also be possible to shutdown to single-user, providing that
the single-user state processes are not using the swap partition.
On AmigaDOS, the command:
xstreamtodev --input=miniroot.fs --rdb-name=<swap partition>
where <swap partition> is the name you gave to the NetBSD partition to be used for swapping. If xstreamtodev is unable to determine the SCSI driver device name or the unit number of the specified partition, you may also need to include the option
--device=<driver.name>
and/or
--unit=<SCSI unit number>
To transfer the miniroot using NetBSD, you should be booted up in single user state on the current NetBSD system, or use the shutdown now command to shutdown to single-user state. Then copy the miniroot using dd:
dd if=miniroot.fs of=/dev/rsd0b
where
/dev/rsd0b
should be the device path of the swap partition
your system is configured to use.
Once the file is copied, reboot back to
AmigaDOS
to boot the upgrade kernel.
miniroot.fs
on the swap partition.
Installing NetBSD is a relatively complex process, but, if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble.
Before you begin, you must have already prepared your hard disk as detailed in the section on preparing your system for install.
The following is a walk-through of the steps necessary to get
NetBSD
installed on your hard disk.
If you wish to stop the installation, you may press
CONTROL-C
at any prompt, but if you do, you'll have to
begin again from scratch.
Transfer the miniroot file system onto the hard disk partition used by NetBSD for swapping, as described in the "Preparing your System for NetBSD Installation" section above.
[This description is for V40 (OS 3.1) ROMs. For older ROMs, there might be small differences. Check your AmigaDOS documentation to learn about the exact procedure.] Using bootblocks may not work on some systems, and may require a mountable file system on others.
Reboot your machine, holding down both mouse buttons if you have a 2-button mouse, the outer mouse buttons if you have a 3-button mouse. On the DraCo, press the left mouse button instead, when the boot screen prompts you for it.
From the boot menu, select Boot Options. Select the swap partition with the miniroot, and then ok. Select Boot now. The machine will boot the bootblock, which will prompt your for a command line. You have a few seconds time to change the default. Entering an empty line will accept the default.
The bootblock uses command lines of the form:
file[ options]
where file
is the kernel file name on the partition where the
boot block is on, and
[options]
may contain the following:
If you have an AGA machine, and your monitor will handle the dblNTSC mode, you may include the -A option to enable the dblNTSC display mode.
If your machine has a fragmented physical memory space, as, e.g., DraCo machines, you should add the -n2 option to enable the use of all memory segments.
sd0, sd1,)
Then you will be prompted for a root device.
At this time type
sd0b,
where
sd0
is the device which contains the swap
partition you created during the hard disk preparation.
When prompted for a dump device, answer
`none'
for the install
(normally, you would tell it one of the swap devices).
When prompted for the root file system type, confirm
`generic',
which will auto-detect it.
If the system should hang after entering the root device, try again with
netbsd -I ff -b
This disables synchronous transfer on all SCSI devices on the first bus.
The system should continue to boot.
For now ignore
``WARNING''
messages about bad dates in clocks, and a warning about
/etc/rc
not existing.
Eventually you will be be asked to enter the pathname of the shell, just press
RETURN.
After a short while, you will be asked to select the type of your keyboard.
After
you have entered a valid response here, the system asks you if
you want to install or upgrade your system.
Since you are reading the
install
section,
`i'
would be the proper response here...
The installer starts with a nice welcome messages. Read this message carefully, it also informs you of the risks involved in continuing! If you still want to go on, type `y'. The installer now continues by trying to figure out your disk configuration. When it is done, you will be prompted to select a root device from the list of disks it has found.
You should know at this point that the disks are
not
numbered according to their SCSI-ID!
The
NetBSD
kernel numbers the SCSI
drives (and other devices on the SCSI bus) sequentially as it finds them.
The drive with the lowest SCSI-ID will be called
sd0,
the next one
sd1,
etc.
Also, any ATAPI disk drives (e.g. ZIP)
will be configured as
``SCSI''
drives, too, and will be configured
before any
`real'
SCSI drives if connected to the Amiga internal port on A4000/A1200
(if any are present). Real IDE drives will be configured as
wd0,
wd1,
etc.
The installer will offer you to look at the NetBSD disk label of the disks at this point. You should do this, to find out what partition letters the NetBSD kernel assigned to the partitions you created, and as a check whether the disk number you are going to use is right.
you are now at the point of no return.
If you confirm that
you want to install
NetBSD,
your hard drive will be modified,
and perhaps its contents scrambled at the whim of the install
program.
Type
Control-C
now
if you don't want this.
At this time, you will need to tell the installer which partition
will be associated with the different file systems.
Normally, you'll want to add a partition for
/usr,
at least.
rsdNc
or
sdNc
partitions for anything!
They are for access to the whole disk only and do
not
correspond to any Amiga partition!
The install program will now make the file systems you specified. There should be only one error per file system in this section of the installation. It will look like this:
newfs: ioctl (WDINFO): Invalid argument
newfs: /dev/rsd0a: can't rewrite disk label
If there are any others, restart from the beginning of the installation process. This error is ok as the Amiga does not write disklabels currently. You should expect this error whenever using newfs.
The install will now ask you want to configure any network information. It ill ask for the machine's host name, domain name, and other network configuration information.
Since the network configuration might have lead to additional (nfs) file system entries, you get another chance to modify your fstab.
You are finally at the point where some real data will be put on your freshly made file systems. Select the device type you wish to install from and off you go....
Some notes:
nrst0).
Try
nrst0h,
nrst0m,
or
nrst0l
instead.
.'.
Next you will be asked to specify the timezone.
Just select the timezone you are in.
The installer will make the correct setup on your root file system
(/).
After the timezone-link is installed,
the installer will proceed by creating the device nodes on your
root file system under
/dev.
Be patient, this will take a while...
Next, the installer will copy your keymap settings to the new system. After this, it will copy the kernel from the installation miniroot to the newly installed / upgraded system. If the installed system already has a kernel, it will ask you for confirmation.
kern.tgz distribution set, this is an old kernel, and you should answer "y" to install a working (although restricted) INSTALL kernel.
If you did install the kern.tgz kernel, you normally should answer "n".
Finally, the installer ask you if you want to install the bootblock
code on your root disk.
This is a matter of personal choice and can also be done from a running
NetBSD
system.
See the
installboot(8)
manual page about how to do this.
Once the installer is done, halt the system with the
halt
command
(wait for
halted
to be displayed) and reboot.
Then again boot
NetBSD
this time selecting the root partition
(/)
from the boot menu, and tell it to boot
netbsd -s
You need to do your final tweaks now. First mount your file systems like so:
mount -av
Your system is now complete but not completely configured; you
should adjust the
/etc/sendmail.cf
file as necessary to suit your site.
You should also examine and adjust the settings in
/etc/rc.conf.
You can use
vi(1)
or
ed(1)
to edit the files.
If you installed the man pages you can type
man vi or man ed
for instructions on how to use these somewhat non-intuitive editors.
Once you are done with the rest of configuration unmount your file systems and halt your system, then reboot:
# cd /
# umount -av
# halt
Finally you can now boot your system and it will be completely functional:
netbsd
When it boots off of the hard drive, you will have a complete
NetBSD
system!
Congratulations!
(You really deserve them!!!)
Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below.
/etc/rc.conf
If you or the installation software haven't done any configuration of
/etc/rc.conf
(sysinst
usually will),
the system will drop you into single user mode on first reboot with the
message
/etc/rc.conf is not configured. Multiuser boot aborted.
and with the root file system
(/)
mounted read-only.
When the system asks you to choose a shell, simply press
RETURN
to get to a
/bin/sh
prompt.
If you are asked for a terminal type, respond with
vt220
(or whatever is appropriate for your terminal type)
and press
RETURN.
You may need to type one of the following commands to get your delete key
to work properly, depending on your keyboard:
# stty erase '^h'
# stty erase '^?'
At this point, you need to configure at least
one file in the
/etc
directory.
You will need to mount your root file system read/write with:
# /sbin/mount -u -w /
Change to the
/etc
directory and take a look at the
/etc/rc.conf
file.
Modify it to your tastes, making sure that you set
rc_configured=YES
so that your changes will be enabled and a multi-user boot can
proceed.
Default values for the various programs can be found in
/etc/defaults/rc.conf,
where some in-line documentation may be found.
More complete documentation can be found in
rc.conf(5).
If your
/usr
directory is on a separate partition and you do not know how to use
ed,
you will have to mount your
/usr
partition to gain access to
ex
or
vi.
Do the following:
# mount /usr
# export TERM=vt220
If you have
/var
on a separate partition, you need to repeat that step for it.
After that, you can edit
/etc/rc.conf
with
vi(1).
When you have finished, type
exit
at the prompt to
leave the single-user shell and continue with the multi-user boot.
Other values that need to be set in
/etc/rc.conf
for a networked environment are
hostname
and possibly
defaultroute,
furthermore add an
ifconfig_int
for your
<int>
network interface,
along the lines of
ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0"
or, if you have
myname.my.dom
in
/etc/hosts:
ifconfig_de0="inet myname.my.dom netmask 255.255.255.0"
To enable proper hostname resolution, you will also want to add an
/etc/resolv.conf
file or (if you are feeling a little more adventurous) run
named(8).
See
resolv.conf(5)
or
named(8)
for more information.
Instead of manually configuring network and naming service,
DHCP can be used by setting
dhclient=YES
in
/etc/rc.conf.
Other files in
/etc
that may require modification or setting up include
/etc/mailer.conf,
/etc/nsswitch.conf,
and
/etc/wscons.conf.
After reboot, you can log in as
root
at the login prompt.
Unless you've set a password in
sysinst,
there
is no initial password.
If you're using the machine in a networked environment,
you should create an account for yourself (see below) and protect it and the
``root''
account with good passwords.
By default, root login from the network is disabled (even via
ssh(1)).
One way to become root over the network is to log in as a different
user that belongs to group
``wheel''
(see
group(5))
and use
su(1)
to become root.
Unless you have connected an unusual terminal device as the console
you can just press
RETURN
when it prompts for
Terminal type? [...].
Use the
useradd(8)
command to add accounts to your system.
Do not
edit
/etc/passwd
directly! See
vipw(8)
and
pwd_mkdb(8)
if you want to edit the password database.
If you have installed the X Window System, look at the files in
/usr/X11R6/lib/X11/doc
for information.
Don't forget to add
/usr/X11R6/bin
to your path in your shell's dot file so that you have access to the X binaries.
If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies installation (and deinstallation), both from source and precompiled binaries.
3.0.3/amiga/All
subdir.
You can install them with the following commands under
sh(1):
# PKG_PATH=ftp://ftp.NetBSD.org/pub/NetBSD/packages/3.0.3/amiga/All # export PKG_PATH # pkg_add -v tcsh # pkg_add -v bash # pkg_add -v perl # pkg_add -v apache # pkg_add -v kde # pkg_add -v mozilla ...
If you are using
csh(1)
then replace the first two lines with the following:
# setenv PKG_PATH ftp://ftp.NetBSD.org/pub/NetBSD/packages/3.0.3/amiga/All ...
The above commands will install the Tenex-csh and Bourne Again shell, the Perl programming language, Apache web server, KDE desktop environment and the Mozilla web browser as well as all the packages they depend on.
/usr/pkgsrc
(though other locations work fine), with the commands:
# mkdir /usr/pkgsrc
#( cd /usr/pkgsrc ; tar -zxpf - ) < pkgsrc.tar.gz
After extracting, see the
README
and
doc/pkgsrc.txt
files in the extraction directory (e.g.
/usr/pkgsrc/README)
for more information.
/etc/mail/aliases
to forward root mail to the right place.
Don't forget to run
newaliases(1)
afterwards.
/etc/mail/sendmail.cf
file will almost definitely need to be adjusted;
files aiding in this can be found in
/usr/share/sendmail.
See the
README
file there for more information.
If you prefer postfix as MTA, adjust
/etc/mailer.conf.
/etc/rc.local
to run any local daemons you use.
/etc
files are documented in section 5 of the manual; so just invoking
# man 5 filename
is likely to give you more information on these files.
The upgrade to NetBSD3.0.3 is a binary upgrade; it can be quite difficult to advance to a later version by recompiling from source due primarily to interdependencies in the various components.
To do the upgrade, you must have the
NetBSD
kernel on
AmigaDOS
and you must transfer the miniroot file system
miniroot.fs
onto the swap partition of the
NetBSD
hard disk.
You must also have at least the
base
binary distribution set available, so that you can upgrade
with it, using one of the upgrade methods described above.
Finally, you must have sufficient disk space available to install the new
binaries.
Since the old binaries are being overwritten in place, you only need
space for the new binaries, which weren't previously on the system.
If you have a few megabytes free on each of your
/
(root) and
/usr
partitions, you should have enough space.
Since upgrading involves replacing the kernel, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to BACK UP ANY IMPORTANT DATA ON YOUR DISK, whether on the NetBSD partition or on another operating system's partition, before beginning the upgrade process.
To upgrade your system, follow the following instructions:
Transfer the miniroot file system onto the hard disk partition used by NetBSD for swapping, as described in the "Preparing your System for NetBSD Installation" section above.
Now boot up NetBSD, with boot blocks installed
Reboot your machine, holding down both mouse buttons if you have a 2-button mouse, the outer mouse buttons if you have a 3-button mouse. On the DraCo, press the left mouse button instead, when the boot screen prompts you for it.
From the boot menu, select Boot Options. Select the swap partition with the miniroot, and then ok. Select Boot now. The machine will boot the bootblock, which will prompt your for a command line. You have a few seconds time to change the default. Entering an empty line will accept the default.
The bootblock uses command lines of the form:
file[ options]
where
file
is the kernel file name on the partition where the
boot block is on, and
options
may contain the same as described in the INSTALL section.
For installing, use
netbsd -b
If you machine has a split memory space, like, e.g., DraCo machines, use this instead:
netbsd -bn2
/)
and swap partitions.
When prompted for the root device, type
sd0b
(replacing
`0'
with the disk number that
NetBSD
used for
your root/swap device).
When prompted for a dump device, answer
`none'
for the upgrade.
(For a normal boot, you would tell it one of the swap devices).
When prompted for the root file system type, confirm
`generic',
which will auto-detect it.
You will be presented with some information about the upgrade
process and a warning message, and will be asked if you wish
to proceed with the upgrade process.
If you answer negatively, the upgrade process will stop, and your disk will
not be modified.
If you answer affirmatively, the upgrade process will begin,
and your disk will be modified.
You may press
CONTROL-C
to stop the upgrade process at any time.
However, if you press it at an inopportune moment, your system
may be left in an inconsistent (and possibly unusable) state.
You will now be greeted and reminded of the fact that this is a potential dangerous procedure and that you should not upgrade the etc set.
When you decide to proceed, you will be prompted to enter your root disk. After you've done this, it will be checked automatically to make sure that the file system is in a sane state before making any modifications. After this is done, you will be asked if you want to configure your network.
You are now allowed to edit your fstab. Normally you don't have to. Note that the upgrade-kit uses its own copy of the fstab. Whatever you do here won't affect your actual fstab. After you are satisfied with your fstab, the upgrade-kit will check all file systems mentioned in it. When they're ok, they will be mounted.
You will now be asked if your sets are stored on a normally mounted file system. You should answer `y' to this question if you have the sets stored on a file system that was present in the fstab. The actions you should take for the set extraction are pretty logical (we think).
After you have extracted the sets, the upgrade kit will proceed with setting the timezone and installing the kernel and bootcode. This is all exactly the same as described in the installation section.
Your system has now been upgraded to NetBSD3.0.3.
After a new kernel has been copied to your hard disk, your machine is a complete NetBSD3.0.3 system. However, that doesn't mean that you're finished with the upgrade process. There are several things that you should do, or might have to do, to insure that the system works properly.
You will probably want to get the
etc
distribution,
extract it, and compare its contents with those in your
/etc
directory.
You will probably want to replace some of your
system configuration files, or incorporate some of the changes
in the new versions into yours.
You will want to delete old binaries that were part
of the version of
NetBSD
that you upgraded from and have since
been removed from the
NetBSD
distribution.
If upgrading from a
NetBSD
version older than 1.0, you might also want to
recompile any locally-built binaries, to take advantage of the
shared libraries.
(Note that any new binaries that you build
will be dynamically linked, and therefore take advantage of
the shared libraries, by default.
For information on how to make statically linked binaries, see the
cc(1)
and
ld(1)
manual pages.)
Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD3.0.3.
/etc/pam.d
with appropriate configuration files for the Pluggable Authentication Modules
(PAM) because you will not be able to login any more otherwise. Using
postinstall
as described below will take care of this. Please refer to
http://www.netbsd.org/guide/en/chap-pam.html
for documentation about PAM.
The following issues can generally be resolved by extracting the etc set into a temporary directory and running postinstall:
postinstall -s /path/to/etc.tgz check
postinstall -s /path/to/etc.tgz fix
Issues fixed by postinstall:
/etc
need upgrading.
These include:
/etc/defaults/*
/etc/mtree/*
/etc/pam.d/*
/etc/daily
/etc/weekly
/etc/monthly
/etc/security
/etc/rc.subr
/etc/rc
/etc/rc.shutdown
/etc/rc.d/*
The following issues need to be resolved manually:
Documentation is available if you first install the manual
distribution set.
Traditionally, the
``man pages''
(documentation) are denoted by
`name(section)'.
Some examples of this are
intro(1),
man(1),
apropros(1),
passwd(1),
and
passwd(5).
The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8.
The man command is used to view the documentation on a topic, and is started by entering man[ section] topic. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after logging in, enter
# man passwd
to read the documentation for
passwd(1).
To view the documentation for
passwd(5),
enter
# man 5 passwd
instead.
If you are unsure of what man page you are looking for, enter
apropos subject-word
where subject-word is your topic of interest; a list of possibly related man pages will be displayed.
If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@NetBSD.org. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions.
There are various mailing lists set up to deal with comments and questions about this release. Please send comments to: netbsd-comments@NetBSD.org.
To report bugs, use the
send-pr(1)
command shipped with
NetBSD,
and fill in as much information about the problem as you can.
Good bug reports include lots of details.
Additionally, bug reports can be sent by mail to:
netbsd-bugs@NetBSD.org.
Use of
send-pr(1)
is encouraged, however, because bugs reported with it
are entered into the
NetBSD
bugs database, and thus can't slip through
the cracks.
There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.NetBSD.org/MailingLists/. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed below).
If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@NetBSD.org.
As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it.
Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick
for their ongoing work on BSD systems, support, and encouragement.
AMD - Advanced Micro Devices, Inc. ASA Computers Aaron Wall ABE Masayuki AboveNet Communications, Inc. Achim Grolms Adam Kasper Adaptec Advanced System Products, Inc. Akihiro IIJIMA Alex Poylisher Algorithmics, Ltd. Alistair Crooks Allegro Networks Aloys Keller Andreas Berg Andreas Jellinghaus Andrew Brown Andrew Gillham Andy Hagans Antonio Larripa Arend Harrewijne Armijn Hemel Atsushi YOKOYAMA Avalon Computer Systems Bay Area Internet Solutions Ben Collver Benoit Lepage Bernhard Moellemann Bill Coldwell Bill Sommerfeld Bill Squier Brad Salai Brains Corporation, Japan Brian Carlstrom Brian McGroarty Brian Mitchell Canada Connect Corporation Carl Shapiro Castor Fu Central Iowa (Model) Railroad Charles Conn Charles D. Cranor Charles M. Hannum Chris Legrow Chris Townsend Christer O. Andersson Christopher G. Demetriou Christos Zoulas Chuck Silvers Cologne Chip AG Computer und Literatur Verlag Computertechnik Krienke & Nolte Computing Services Department, The University of Liverpool Convert Tools Co-operative Research Centre for Enterprise Distributed Curt Sampson DAYOMON from Japan Damicon Kraa, Finland Daniel de Kok Dave Burgess Dave Rand Dave Tyson David Brownlee Dayton Clark Demon Internet, UK Derek Fellion Digital Equipment Corporation Distributed Processing Technology Distro Jockey Douglas J. Trainor Dr.ir. F.W. Dillema Easynet, UK Ed Braaten Edward Richley emuty Eric and Rosemary Spahr Erik Berls Erik E. Fair Erkki Ruohtula Ernst Lehmann Espen Randen Ewald Kicker Florent Parent Frank Kardel Free Hardware Foundation Front Range *BSD User Group FUKAUMI Naoki Gan Uesli Starling Garth R. Patil Geert Hendrickx (ghen) Geert Jan de Groot GK Meier Gordon Zaft Grant Beattie Greg Gingerich Greg Girczyc Guenther Grau HP Sweden Hanno Wagner Hans Huebner Harald Koerfgen Haroon Khalid Harry McDonald Hauke Fath Heiko W. Rupp Herb Peyerl Hernani Marques Madeira Hidekichi Ookubo Hideyuki Kido Hisashi Fujinaka Holger Weiss Hubert Feyrer IBM Corporation IMAI Kiyoshi Innovation Development Enterprises of America Intel Internet Software Consortium Internet Users Forever IKI Interoute Telecommunications, UK JNUG (raised at JNUG meeting & BOF August 2005) James Bursa James Chacon Jan Joris Vereijken Jason Birnschein Jason Brazile Jason R. Thorpe Jeff Rizzo Jeff Woodall - Portland, OR Jens Schoenfeld Jim Wise Joachim Nink Joachim Thiemann Joel CARNAT John Heasley John Kohl John P. Refling Jonathan P. Kay Jordan K. Hubbard Jorgen Lundman Karl Wagner Kenji Hisazumi Kenneth Alan Hornstein Kenneth P. Stox Kevin Keith Woo Kevin Sullivan Klaus Lichti Kimmo Suominen Korea BSD User Forum Krister Waldfridsson Kwok Ng Lars Mathiassen Lehmanns Fachbochhandlung Lex Wennmacher LinuxFest Northwest Luke Maurits Luke Mewburn MS Macro System GmbH, Germany Maki Kato Marc Tooley Marcus Wyremblewski Mark Brinicombe Mark Houde Mark Perkins Mark S. Thomas Mason Loring Bliss Martin Cernohorsky Martin J. Ekendahl Matt Dainty Matt Thomas Matthew Jacob Matthew Sporleder Matthias Scheler Mattias Karlsson Mel Kravitz Michael Graff Michael "Kvedulv" Moll Michael L. Hitch Michael Richardson Michael Thompson Michael W. James Mike Price Mirko Thiesen (Thiesi) Murphy Software BV, Netherlands Neil J. McRae Noah M. Keiserman Norman R. McBride Numerical Aerospace Simulation Facility, NASA Ames Research Olaf "Rhialto" Seibert Oliver Cahagne Oppedahl & Larson LLP Palle Lyckegaard Paul Ripke Paul Southworth Pawel Rogocz Pearson Education Perry E. Metzger Petar Bogdanovic Peter C. Wallace Peter J. Bui Peter Postma Petri T. Koistinen Phil Thomas Piermont Information Systems Inc. Pierre-Philipp Braun Precedence Technologies Ltd Public Access Networks Corporation Ralph Campbell Randy Ray Real Weasel Reinoud Zandijk Renewed Health Company Richard Nelson Rob Windsor Robert Pankratz Robert Thille Roland Lichti Ross Harvey Ryan Campbell SDF Public Access Unix, Inc. 501(c)(7) SMC Networks Inc. Salient Systems Inc. Sander van Dijk Scott Ellis Scott Kaplan Scott Walters Sean Davis Simon Burge Soren Jacobsen Soren Jorvang Stephen Borrill Stephen Early Steve Allen Steve Wadlow Steven M. Bellovin SunROOT# Project Sylvain Schmitz Takahiro Kambe TAKEUCHI Yoji Tamotsu Kanoh Tasis Michalakopoulos (Athens, Greece) Tatoku Ogaito Ted Lemon Ted Spradley The Names Database The NetBSD Mission The People's Republic of Ames Thierry Lacoste Thierry Laronde Thomas Runge Thor Lancelot Simon Tim Law Timo Scholer Tino Hanich Tino Wildenhain Tom Coulter Tom Ivar Helbekkmo Tom Lyon Tomas Dabasinskas Torsten Harenberg Toru Nishimura Toshiba Turbocat's Development Tyler Sarna UTN Web Directory VMC Harald Frank, Germany Warped Communications, Inc. Wasabi Systems, Inc. Whitecross Database Systems Ltd. William Gnadt Worria Affordable Web Hosting Worria Web Hosting wwwTrace Traceroute Server Directory Yusuke Yokota Zach Metzinger
(If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.)
(in alphabetical order)
| The NetBSD core group: | |||
| Allen Briggs | briggs@NetBSD.org | ||
| Matt Thomas | matt@NetBSD.org | ||
| Valeriy E. Ushakov | uwe@NetBSD.org | ||
| YAMAMOTO Takashi | yamt@NetBSD.org | ||
| Christos Zoulas | christos@NetBSD.org | ||
|
| |||
| The portmasters (and their ports): | |||
| Ta | |||
| Allen Briggs | briggs@NetBSD.org | sandpoint | |
| Anders Magnusson | ragge@NetBSD.org | vax | |
| Andrey Petrov | petrov@NetBSD.org | sparc64 | |
| Ben Harris | bjh21@NetBSD.org | acorn26 | |
| Chris Gilbert | chris@NetBSD.org | cats | |
| Christian Limpach | cl@NetBSD.org | xen | |
| Eduardo Horvath | eeh@NetBSD.org | evbppc | |
| Frank van der Linden | fvdl@NetBSD.org | amd64 | |
| Frank van der Linden | fvdl@NetBSD.org | i386 | |
| Gavan Fantom | gavan@NetBSD.org | iyonix | |
| IWAMOTO Toshihiro | toshii@NetBSD.org | hpcarm | |
| Ichiro Fukuhara | ichiro@NetBSD.org | hpcarm | |
| Ignatios Souvatzis | is@NetBSD.org | amiga | |
| Izumi Tsutsui | tsutsui@NetBSD.org | hp300 | |
| Izumi Tsutsui | tsutsui@NetBSD.org | news68k | |
| Jason Thorpe | thorpej@NetBSD.org | algor | |
| Jason Thorpe | thorpej@NetBSD.org | evbarm | |
| Jason Thorpe | thorpej@NetBSD.org | shark | |
| Jeremy Cooper | jeremy@NetBSD.org | sun3 | |
| Jonathan Stone | jonathan@NetBSD.org | pmax | |
| Julian Coleman | jdc@NetBSD.org | atari | |
| Jun-ichiro itojun Hagino | itojun@NetBSD.org | evbsh3 | |
| Jun-ichiro itojun Hagino | itojun@NetBSD.org | mmeye | |
| Kazuki Sakamoto | sakamoto@NetBSD.org | bebox | |
| Lennart Augustsson | augustss@NetBSD.org | pmppc | |
| Marcus Comstedt | marcus@NetBSD.org | dreamcast | |
| Martin Husemann | martin@NetBSD.org | sparc64 | |
| Matt DeBergalis | deberg@NetBSD.org | next68k | |
| Matt Fredette | fredette@NetBSD.org | hp700 | |
| Matt Fredette | fredette@NetBSD.org | sun2 | |
| Matt Thomas | matt@NetBSD.org | alpha | |
| Matt Thomas | matt@NetBSD.org | netwinder | |
| Matthias Drochner | drochner@NetBSD.org | cesfic | |
| NISHIMURA Takeshi | nsmrtks@NetBSD.org | x68k | |
| NONAKA Kimihiro | nonaka@NetBSD.org | prep | |
| Nathan Williams | nathanw@NetBSD.org | sun3 | |
| Noriyuki Soda | soda@NetBSD.org | arc | |
| Paul Kranenburg | pk@NetBSD.org | sparc | |
| Phil Nelson | phil@NetBSD.org | pc532 | |
| Reinoud Zandijk | reinoud@NetBSD.org | acorn32 | |
| Ross Harvey | ross@NetBSD.org | alpha | |
| Søren Jørvang | soren@NetBSD.org | cobalt | |
| Søren Jørvang | soren@NetBSD.org | sgimips | |
| Scott Reynolds | scottr@NetBSD.org | mac68k | |
| Shin Takemura | takemura@NetBSD.org | hpcmips | |
| Simon Burge | simonb@NetBSD.org | evbmips | |
| Simon Burge | simonb@NetBSD.org | evbppc | |
| Simon Burge | simonb@NetBSD.org | pmax | |
| Simon Burge | simonb@NetBSD.org | sbmips | |
| Steve Woodford | scw@NetBSD.org | evbsh5 | |
| Steve Woodford | scw@NetBSD.org | mvme68k | |
| Steve Woodford | scw@NetBSD.org | mvmeppc | |
| Tohru Nishimura | nisimura@NetBSD.org | luna68k | |
| Tsubai Masanari | tsubai@NetBSD.org | macppc | |
| Tsubai Masanari | tsubai@NetBSD.org | newsmips | |
| UCHIYAMA Yasushi | uch@NetBSD.org | hpcsh | |
| UCHIYAMA Yasushi | uch@NetBSD.org | playstation2 | |
| Wayne Knowles | wdk@NetBSD.org | mipsco | |
| Wolfgang Solfrank | ws@NetBSD.org | ofppc | |
|
| |||
| The NetBSD 3.0.3 Release Engineering team: | |||
| Grant Beattie | grant@NetBSD.org | ||
| Erik Berls | cyber@NetBSD.org | ||
| James Chacon | jmc@NetBSD.org | ||
| Julian Coleman | jdc@NetBSD.org | ||
| Håvard Eidnes | he@NetBSD.org | ||
| Jun-ichiro itojun Hagino | itojun@NetBSD.org | ||
| Geert Hendrickx | ghen@NetBSD.org | ||
| Soren Jacobsen | snj@NetBSD.org | ||
| SAITOH Masanobu | msaitoh@NetBSD.org | ||
| Luke Mewburn | lukem@NetBSD.org | ||
| Jeff Rizzo | riz@NetBSD.org | ||
| Matthias Scheler | tron@NetBSD.org | ||
| Curt Sampson | cjs@NetBSD.org | ||
| Jim Wise | jwise@NetBSD.org | ||
|
| |||
| NetBSD Developers: | |||
| Nathan Ahlstrom | nra@NetBSD.org | ||
| Steve Allen | wormey@NetBSD.org | ||
| Jukka Andberg | jandberg@NetBSD.org | ||
| Julian Assange | proff@NetBSD.org | ||
| Lennart Augustsson | augustss@NetBSD.org | ||
| Christoph Badura | bad@NetBSD.org | ||
| Bang Jun-Young | junyoung@NetBSD.org | ||
| Dieter Baron | dillo@NetBSD.org | ||
| Robert V. Baron | rvb@NetBSD.org | ||
| Grant Beattie | grant@NetBSD.org | ||
| Jason Beegan | jtb@NetBSD.org | ||
| Erik Berls | cyber@NetBSD.org | ||
| Hiroyuki Bessho | bsh@NetBSD.org | ||
| John Birrell | jb@NetBSD.org | ||
| Mason Loring Bliss | mason@NetBSD.org | ||
| Charles Blundell | cb@NetBSD.org | ||
| Rafal Boni | rafal@NetBSD.org | ||
| Sean Boudreau | seanb@NetBSD.org | ||
| Manuel Bouyer | bouyer@NetBSD.org | ||
| John Brezak | brezak@NetBSD.org | ||
| Allen Briggs | briggs@NetBSD.org | ||
| Mark Brinicombe | mark@NetBSD.org | ||
| Aaron Brown | abrown@NetBSD.org | ||
| Andrew Brown | atatat@NetBSD.org | ||
| David Brownlee | abs@NetBSD.org | ||
| Frederick Bruckman | fredb@NetBSD.org | ||
| Jon Buller | jonb@NetBSD.org | ||
| Simon Burge | simonb@NetBSD.org | ||
| Robert Byrnes | byrnes@NetBSD.org | ||
| D'Arcy J.M. Cain | darcy@NetBSD.org | ||
| Dave Carrel | carrel@NetBSD.org | ||
| Daniel Carosone | dan@NetBSD.org | ||
| James Chacon | jmc@NetBSD.org | ||
| Bill Coldwell | billc@NetBSD.org | ||
| Julian Coleman | jdc@NetBSD.org | ||
| Ben Collver | ben@NetBSD.org | ||
| Jeremy Cooper | jeremy@NetBSD.org | ||
| Chuck Cranor | chuck@NetBSD.org | ||
| Alistair Crooks | agc@NetBSD.org | ||
| Aidan Cully | aidan@NetBSD.org | ||
| Johan Danielsson | joda@NetBSD.org | ||
| John Darrow | jdarrow@NetBSD.org | ||
| Jed Davis | jld@NetBSD.org | ||
| Matt DeBergalis | deberg@NetBSD.org | ||
| Rob Deker | deker@NetBSD.org | ||
| Chris G. Demetriou | cgd@NetBSD.org | ||
| Tracy Di Marco White | gendalia@NetBSD.org | ||
| Jaromír Dolecek | jdolecek@NetBSD.org | ||
| Andy Doran | ad@NetBSD.org | ||
| Roland Dowdeswell | elric@NetBSD.org | ||
| Emmanuel Dreyfus | manu@NetBSD.org | ||
| Matthias Drochner | drochner@NetBSD.org | ||
| Jun Ebihara | jun@NetBSD.org | ||
| Elad Efrat | elad@NetBSD.org | ||
| Håvard Eidnes | he@NetBSD.org | ||
| Stoned Elipot | seb@NetBSD.org | ||
| Michael van Elst | mlelstv@NetBSD.org | ||
| Enami Tsugutomo | enami@NetBSD.org | ||
| Bernd Ernesti | veego@NetBSD.org | ||
| Erik Fair | fair@NetBSD.org | ||
| Gavan Fantom | gavan@NetBSD.org | ||
| Hubert Feyrer | hubertf@NetBSD.org | ||
| Jason R. Fink | jrf@NetBSD.org | ||
| Matt Fredette | fredette@NetBSD.org | ||
| Thorsten Frueauf | frueauf@NetBSD.org | ||
| Castor Fu | castor@NetBSD.org | ||
| Ichiro Fukuhara | ichiro@NetBSD.org | ||
| Quentin Garnier | cube@NetBSD.org | ||
| Thomas Gerner | thomas@NetBSD.org | ||
| Simon J. Gerraty | sjg@NetBSD.org | ||
| Justin Gibbs | gibbs@NetBSD.org | ||
| Chris Gilbert | chris@NetBSD.org | ||
| Eric Gillespie | epg@NetBSD.org | ||
| Adam Glass | glass@NetBSD.org | ||
| Michael Graff | explorer@NetBSD.org | ||
| Brian C. Grayson | bgrayson@NetBSD.org | ||
| Matthew Green | mrg@NetBSD.org | ||
| Andreas Gustafsson | gson@NetBSD.org | ||
| Jun-ichiro itojun Hagino | itojun@NetBSD.org | ||
| Juergen Hannken-Illjes | hannken@NetBSD.org | ||
| Charles M. Hannum | mycroft@NetBSD.org | ||
| Ben Harris | bjh21@NetBSD.org | ||
| Ross Harvey | ross@NetBSD.org | ||
| Eric Haszlakiewicz | erh@NetBSD.org | ||
| John Hawkinson | jhawk@NetBSD.org | ||
| HAMAJIMA Katsuomi | hamajima@NetBSD.org | ||
| HAYAKAWA Koichi | haya@NetBSD.org | ||
| John Heasley | heas@NetBSD.org | ||
| Geert Hendrickx | ghen@NetBSD.org | ||
| René Hexel | rh@NetBSD.org | ||
| Kouichirou Hiratsuka | hira@NetBSD.org | ||
| Michael L. Hitch | mhitch@NetBSD.org | ||
| Christian E. Hopps | chopps@NetBSD.org | ||
| Ken Hornstein | kenh@NetBSD.org | ||
| Marc Horowitz | marc@NetBSD.org | ||
| Eduardo Horvath | eeh@NetBSD.org | ||
| Nick Hudson | skrll@NetBSD.org | ||
| Shell Hung | shell@NetBSD.org | ||
| Martin Husemann | martin@NetBSD.org | ||
| Dean Huxley | dean@NetBSD.org | ||
| Love Hörnquist Åstrand | lha@NetBSD.org | ||
| Bernardo Innocenti | bernie@NetBSD.org | ||
| Tetsuya Isaki | isaki@NetBSD.org | ||
| ITOH Yasufumi | itohy@NetBSD.org | ||
| IWAMOTO Toshihiro | toshii@NetBSD.org | ||
| Matthew Jacob | mjacob@NetBSD.org | ||
| Soren Jacobsen | snj@NetBSD.org | ||
| Lonhyn T. Jasinskyj | lonhyn@NetBSD.org | ||
| Darrin Jewell | dbj@NetBSD.org | ||
| Chris Jones | cjones@NetBSD.org | ||
| Søren Jørvang | soren@NetBSD.org | ||
| Takahiro Kambe | taca@NetBSD.org | ||
| Antti Kantee | pooka@NetBSD.org | ||
| Masanori Kanaoka | kanaoka@NetBSD.org | ||
| Frank Kardel | kardel@NetBSD.org | ||
| Mattias Karlsson | keihan@NetBSD.org | ||
| KAWAMOTO Yosihisa | kawamoto@NetBSD.org | ||
| Mario Kemper | magick@NetBSD.org | ||
| Min Sik Kim | minskim@NetBSD.org | ||
| Thomas Klausner | wiz@NetBSD.org | ||
| Klaus Klein | kleink@NetBSD.org | ||
| John Klos | jklos@NetBSD.org | ||
| Wayne Knowles | wdk@NetBSD.org | ||
| Takayoshi Kochi | kochi@NetBSD.org | ||
| John Kohl | jtk@NetBSD.org | ||
| Daniel de Kok | daniel@NetBSD.org | ||
| Paul Kranenburg | pk@NetBSD.org | ||
| Martti Kuparinen | martti@NetBSD.org | ||
| Kentaro A. Kurahone | kurahone@NetBSD.org | ||
| Kevin Lahey | kml@NetBSD.org | ||
| Johnny C. Lam | jlam@NetBSD.org | ||
| Martin J. Laubach | mjl@NetBSD.org | ||
| Greg Lehey | grog@NetBSD.org | ||
| Ted Lemon | mellon@NetBSD.org | ||
| Christian Limpach | cl@NetBSD.org | ||
| Frank van der Linden | fvdl@NetBSD.org | ||
| Joel Lindholm | joel@NetBSD.org | ||
| Mike Long | mikel@NetBSD.org | ||
| Michael Lorenz | macallan@NetBSD.org | ||
| Warner Losh | imp@NetBSD.org | ||
| Tomasz Luchowski | zuntum@NetBSD.org | ||
| Federico Lupi | federico@NetBSD.org | ||
| Brett Lymn | blymn@NetBSD.org | ||
| Paul Mackerras | paulus@NetBSD.org | ||
| Anders Magnusson | ragge@NetBSD.org | ||
| MAEKAWA Masahide | gehenna@NetBSD.org | ||
| David Maxwell | david@NetBSD.org | ||
| Dan McMahill | dmcmahill@NetBSD.org | ||
| Gregory McGarry | gmcgarry@NetBSD.org | ||
| Jared D. McNeill | jmcneill@NetBSD.org | ||
| Neil J. McRae | neil@NetBSD.org | ||
| Perry Metzger | perry@NetBSD.org | ||
| Simas Mockevicius | symka@NetBSD.org | ||
| Juan Romero Pardines | xtraeme@NetBSD.org | ||
| Julio M. Merino Vidal | jmmv@NetBSD.org | ||
| Minoura Makoto | minoura@NetBSD.org | ||
| Luke Mewburn | lukem@NetBSD.org | ||
| der Mouse | mouse@NetBSD.org | ||
| Joseph Myers | jsm@NetBSD.org | ||
| Ken Nakata | kenn@NetBSD.org | ||
| Takeshi Nakayama | nakayama@NetBSD.org | ||
| Phil Nelson | phil@NetBSD.org | ||
| John Nemeth | jnemeth@NetBSD.org | ||
| Bob Nestor | rnestor@NetBSD.org | ||
| NISHIMURA Takeshi | nsmrtks@NetBSD.org | ||
| Tohru Nishimura | nisimura@NetBSD.org | ||
| NONAKA Kimihiro | nonaka@NetBSD.org | ||
| Takehiko NOZAKI | tnozaki@NetBSD.org | ||
| Jesse Off | joff@NetBSD.org | ||
| Tatoku Ogaito | tacha@NetBSD.org | ||
| OKANO Takayoshi | kano@NetBSD.org | ||
| Masaru Oki | oki@NetBSD.org | ||
| Atsushi Onoe | onoe@NetBSD.org | ||
| Greg Oster | oster@NetBSD.org | ||
| Jonathan Perkin | sketch@NetBSD.org | ||
| Herb Peyerl | hpeyerl@NetBSD.org | ||
| Matthias Pfaller | matthias@NetBSD.org | ||
| Chris Pinnock | cjep@NetBSD.org | ||
| Adrian Portelli | adrianp@NetBSD.org | ||
| Rui Paulo | rpaulo@NetBSD.org | ||
| Peter Postma | peter@NetBSD.org | ||
| Dante Profeta | dante@NetBSD.org | ||
| Chris Provenzano | proven@NetBSD.org | ||
| Niels Provos | provos@NetBSD.org | ||
| Michael Rauch | mrauch@NetBSD.org | ||
| Marc Recht | recht@NetBSD.org | ||
| Darren Reed | darrenr@NetBSD.org | ||
| Jeremy C. Reed | reed@NetBSD.org | ||
| Antoine Reilles | tonio@NetBSD.org | ||
| Tyler R. Retzlaff | rtr@NetBSD.org | ||
| Scott Reynolds | scottr@NetBSD.org | ||
| Michael Richardson | mcr@NetBSD.org | ||
| Tim Rightnour | garbled@NetBSD.org | ||
| Jeff Rizzo | riz@NetBSD.org | ||
| Gordon Ross | gwr@NetBSD.org | ||
| Steve Rumble | rumble@NetBSD.org | ||
| Ilpo Ruotsalainen | lonewolf@NetBSD.org | ||
| Heiko W. Rupp | hwr@NetBSD.org | ||
| David Sainty | dsainty@NetBSD.org | ||
| SAITOH Masanobu | msaitoh@NetBSD.org | ||
| Kazuki Sakamoto | sakamoto@NetBSD.org | ||
| Curt Sampson | cjs@NetBSD.org | ||
| Wilfredo Sanchez | wsanchez@NetBSD.org | ||
| Ty Sarna | tsarna@NetBSD.org | ||
| SATO Kazumi | sato@NetBSD.org | ||
| Jan Schaumann | jschauma@NetBSD.org | ||
| Matthias Scheler | tron@NetBSD.org | ||
| Karl Schilke (rAT) | rat@NetBSD.org | ||
| Amitai Schlair | schmonz@NetBSD.org | ||
| Konrad Schroder | perseant@NetBSD.org | ||
| Georg Schwarz | schwarz@NetBSD.org | ||
| Lubomir Sedlacik | salo@NetBSD.org | ||
| Christopher SEKIYA | sekiya@NetBSD.org | ||
| Reed Shadgett | dent@NetBSD.org | ||
| John Shannon | shannonjr@NetBSD.org | ||
| Tim Shepard | shep@NetBSD.org | ||
| Takeshi Shibagaki | shiba@NetBSD.org | ||
| Naoto Shimazaki | igy@NetBSD.org | ||
| Takao Shinohara | shin@NetBSD.org | ||
| Takuya SHIOZAKI | tshiozak@NetBSD.org | ||
| Chuck Silvers | chs@NetBSD.org | ||
| Thor Lancelot Simon | tls@NetBSD.org | ||
| Jeff Smith | jeffs@NetBSD.org | ||
| Noriyuki Soda | soda@NetBSD.org | ||
| Wolfgang Solfrank | ws@NetBSD.org | ||
| SOMEYA Yoshihiko | someya@NetBSD.org | ||
| Bill Sommerfeld | sommerfeld@NetBSD.org | ||
| Jörg Sonnenberger | joerg@NetBSD.org | ||
| Ignatios Souvatzis | is@NetBSD.org | ||
| Bill Squier | groo@NetBSD.org | ||
| Jonathan Stone | jonathan@NetBSD.org | ||
| Bill Studenmund | wrstuden@NetBSD.org | ||
| Kevin Sullivan | sullivan@NetBSD.org | ||
| SUNAGAWA Keiki | kei@NetBSD.org | ||
| Kimmo Suominen | kim@NetBSD.org | ||
| Shin Takemura | takemura@NetBSD.org | ||
| TAMURA Kent | kent@NetBSD.org | ||
| Shin'ichiro TAYA | taya@NetBSD.org | ||
| Ian Lance Taylor | ian@NetBSD.org | ||
| Matt Thomas | matt@NetBSD.org | ||
| Jason Thorpe | thorpej@NetBSD.org | ||
| Christoph Toshok | toshok@NetBSD.org | ||
| Greg Troxel | gdt@NetBSD.org | ||
| Tsubai Masanari | tsubai@NetBSD.org | ||
| Izumi Tsutsui | tsutsui@NetBSD.org | ||
| UCHIYAMA Yasushi | uch@NetBSD.org | ||
| Masao Uebayashi | uebayasi@NetBSD.org | ||
| Shuichiro URATA | ur@NetBSD.org | ||
| Todd Vierling | tv@NetBSD.org | ||
| Aymeric Vincent | aymeric@NetBSD.org | ||
| Paul Vixie | vixie@NetBSD.org | ||
| Mike M. Volokhov | mishka@NetBSD.org | ||
| Krister Walfridsson | kristerw@NetBSD.org | ||
| Lex Wennmacher | wennmach@NetBSD.org | ||
| Leo Weppelman | leo@NetBSD.org | ||
| Assar Westerlund | assar@NetBSD.org | ||
| Todd Whitesel | toddpw@NetBSD.org | ||
| Nathan Williams | nathanw@NetBSD.org | ||
| Rob Windsor | windsor@NetBSD.org | ||
| Dan Winship | danw@NetBSD.org | ||
| Jim Wise | jwise@NetBSD.org | ||
| Michael Wolfson | mbw@NetBSD.org | ||
| Steve Woodford | scw@NetBSD.org | ||
| Colin Wood | ender@NetBSD.org | ||
| YAMAMOTO Takashi | yamt@NetBSD.org | ||
| Yuji Yamano | yyamano@NetBSD.org | ||
| Reinoud Zandijk | reinoud@NetBSD.org | ||
| S.P.Zeidler | spz@NetBSD.org | ||
| Maria Zevenhoven | maria7@NetBSD.org | ||
| Christos Zoulas | christos@NetBSD.org | ||
|
| |||
| Other contributors: | |||
| Dave Burgess | burgess@cynjut.infonet.net | ||
| Brian R. Gaeke | brg@dgate.org | ||
| Brad Grantham | grantham@tenon.com | ||
| Lawrence Kesteloot | kesteloo@cs.unc.edu | ||
| Waldi Ravens | waldi@moacs.indiv.nl.net |
All product names mentioned herein are trademarks or registered trademarks of their respective owners.
The following notices are required to satisfy the license terms of the software that we have mentioned in this document:
This product includes software developed by the University of
California, Berkeley and its contributors.